(ONE)

Indicator capacity and division setting and calibration

Long press M+ key and power on

The capacity is shown

Press M- key and the Print key to add and subtract values

Shift the decimal point left and right by pressing MR key and TARE key

Save the capacity

The division is shown

Add and subtract values of division

Shift the decimal point left and right

Save the division

CAL is shown and enter calibration

Press TARE key

The calibration value 6kg is shown

Press SET key

Change the calibration value to 2kg

Save setting

Put 2kg calibrated weight on the platform

Press TARE key to calibrate

On2 is shown and save calibration

PASS is shown and calibration is finished

Connect large display

Connect printer

The indicator is connected to a printer and a large display with dual serial ports

(TWO)

Printer and Large Display

Parameter selection and settings

Long press SET key

Press TARE key until PER1 is shown

Press SET key to enter the sub-parameters

Press TARE key and MR key to choose parameters

Choose parameter GP and save it

Press TARE key until PER i2 is shown

Press SET key to enter the sub-parameters

TARE key and MR key to choose parameters

Choose parameters CX and save it

Press ZERO key to exit the setting

Put 2kg calibrated weight on the platform

Large display shows weighing value

After the weighing is stable, the printer prints the label

Put 1kg calibrated weight on the platform

Large display shows weighing value

After the weighing is stable, the printer prints the label